Dial-up Internet Support

Dial-up Internet (56K and ISDN)

Windows 98 Windows NT Windows ME Windows 2000 Windows XP Mac OS X

Windows 98 Dial-Up Networking Procedures To set up your Speed Factory Dial Internet Service using Windows 98, please follow the instructions below: Double-click the My Computer icon on your desktop. In the My Computer window, double-click Dial-Up Networking. In the Dial-Up Networking window, double-click Make New Connection. Name the new entry Speed Factory.net, and click Next. Enter the appropriate number, and click Next. Click Finish to save. Return to the Dial-Up Networking window and right-click the Speed Factory icon. Click Properties. Click the Server Types tab. Select the Enable software compression and TCP/IP check boxes. The other choices should not be selected. Continue by clicking the TCP/IP Settings button. Select Server assigned IP address and Server assigned name server addresses. Select the Use IP header compression and Use default gateway on remote network check boxes. Click OK. Click OK again. Double-click the Speed Factory icon in the Dial-Up Networking window to connect. Enter your User name and Password. Click Connect. You are now ready to browse the Internet. Creating a Shortcut to Your New Connection on Windows 98 Click the Start button, point to Settings, and then click Dial-up Networking. Right-click and drag the Speed Factory icon to your desktop and release the mouse button. Click Create Shortcut(s) Here.

:: top

Windows NT Dial-Up Networking Procedures To set up your Speed Factory Dial Internet Service using Windows NT, please follow the instructions below: Double-click My Computer. In the My Computer window, double-click Dial-Up Networking. In the Phonebook entry to dial section, click New. Name the new entry Speed Factory and click Next. Select the I am calling the Internet check box, and click Next. Enter the appropriate number, and click Next. Click Finish to save. In the Dial-Up Networking box, click the More menu and select Edit entry and modems properties. Click the Server tab. Select the TCP/IP and Enable software compression check boxes. The other choices should be left blank. Click TCP/IP Settings. Select Server assigned IP address and Server assigned name server addresses. Select the Use IP header compression and Use default gateway on remote network check boxes. Click OK. In the Edit Phonebook Entry screen, click OK. In the Dial-Up Networking screen, click Dial to connect. Enter your user name and enter your password. Click OK. Begin browsing. Creating a Shortcut to Your New Connection Windows NT Click the Start button, point to Programs > Accessories > Dial-up Networking. Click the More button and select Create shortcut to entry. Choose to look in the desktop and click OK.

:: top

Windows ME Dial-Up Networking Procedures Dial-Up Networking can be located by selecting Start > Settings > Dial-Up Networking. In the Dial-Up Networking window, double-click Make New Connection. Name the new entry Speed Factory, and click Next. Enter the appropriate telephone number, and click Next. Click Finish to save. Return to the Dial-up Networking window and right-click the Speed Factory icon. Click Properties. Click on the Networking tab and select the Enable software compression and TCP/IP check boxes (the other choices should not be selected). Next, click the TCP/IP Settings button. Select Server assigned IP address and Server assigned name server addresses. Select the Use IP header compression and Use default gateway on remote network check boxes. Click OK. Click OK again. Return to the Dial-up Networking window and double-click on the Speed Factory icon. Enter your User name and password, then click Connect. You are now ready to browse the Internet. Creating a Shortcut to Your New Connection in Windows ME Click the Start button, point to Settings, and then click Dial-up Networking. Right-click and drag the Speed Factory icon to your desktop and release the mouse button. Click Create Shortcut(s) Here.

:: top

Windows 2000 Dial-Up Networking Procedures To set up your Speed Factory Dial Internet Service using Windows 2000, please follow the instructions below: Open Network and Dial-up Connections by selecting Start > Settings > Network and Dial-up Connections. Double-click on the Make New Connection icon to open the Connection Wizard. Click Next. Select Dial-up to the Internet. Then click Next. Select "I want to set up my Internet connection manually", or "I want to connect through a local area network (LAN)." Then click Next. Select "I connect through a phone line and a modem." Then click Next. Enter the appropriate telephone number for the local Dial-up connection. Then click Next. Enter your user name and password. Then click Next. Name the new entry Speed Factory, and click Next. You will be asked if you want to set up an Email account. Select No and click Next. Click Finish. Creating a Shortcut to Your New Connection in Windows 2000 Right-click on My Network Places on you desktop and choose Properties. Right-click and drag the Speed Factory icon to your desktop and release the mouse button. Click Create Shortcut(s) Here.

:: top

Windows XP Dial-Up Networking Setup Dial-Up Networking can be located by selecting Start > Control Panel > Network and Internet Connections > Network Connections. To set up your Dial-up Connection using Windows XP, please follow the instructions below. In the Network Connections window under Network Tasks, click Create a New Connection. Click Next. Highlight Connect to the Internet, and click Next. Highlight Set up my connection manually, and click Next. Highlight Connect using a dial-up modem, and click Next. Type in Speed Factory, and click Next. Enter the appropriate number, and click Next. Enter your username and password (then retype your password in the Confirm password input box), and click Next. Click Finish. Note: Check the box to add a shortcut to your desktop, if desired. The Connect to Speed Factory window will appear. Click Properties. Note: If this window does not appear, then it can be found at Start > Control Panel > Network and Internet Connections > Network Connections and then click Speed Factory Click the Networking tab. Highlight Internet Protocol (TCP/IP), and then click Properties. Select Obtain an IP address automatically and select Obtain DNS server address automatically. Click Advanced. Check Use the default gateway on remote network and Use IP header compression, and then click OK. Click OK. Click OK again. Enter your username and Password, and then click Dial. Creating a Shortcut to Your New Connection in Windows XP Click the Start button, point to Control Panel > Network and Internet Connections, and then click on Network Connections. Right-click and drag the Speed Factory icon to your desktop, then release your mousebutton. Click Create Shortcut(s) Here.

:: top

Mac OS10.x Dial-Up Networking Procedures Dial-Up Networking can be located by selecting Start > Control Panel > Network and Internet Connections > Network Connections. To set up your Dial-up Connection using Windows XP, please follow the instructions below. From the Desktop, click on the Apple menu, and select "System Preferences..." Once the System Preferences window loads, click on "Network" to load the Network Preferences. In the Network Preferences pane, set : Location to "Automatic," Set Show to "Internal Modem".; Set Configure to "use PPP." The "Domain Name Servers" should be left blank. The "Search Domain" should be blank as well. When done, click on the "PPP" tab. On the PPP tab, Service Provider should be "Speed Factory" Enter the Access Number, Enter the Account name, Enter the Account password, Check the "Save password" box. To change or check the PPP options, click on the "PPP Options" button In the PPP Options window: If you want to automatically connect when the browser opens, or email program, or any TCP/IP application, make sure that "Connect automatically when starting TCP/IP applications" is checked. Note: If unchecked, you will have to connect manually using the Internet Connect application. Click "OK" to exit PPP Options. By default, the Proxy settings tab is blank. Speed Factory does not require proxy settings. Please Leave these blank. Click the Modems Tab. On the Modems Tab, To change the internal modem protocol, you would do so by clicking on the "Modem:" pulldown menu Selecting "Apple Internal 56k Modem(V.34)." Make sure that the modem is set to "tone" dialing instead of "pulse." Once you are all through configuring the network preferences, click on "Apply Now" and close the window.

:: top